Germany Engineering News

The company received the fifth full purchase order for its InCarrier® device transfer system with InStrip® test handling system adapted to metal frame-based carriers.

SIPOS Aktorik, supplier of specialist and standard actuators, has undergone a major expansion of its service team.

During an extensive evaluation, the MT9510, already known for its outstanding temperature performance, met customer expectations and significantly outperformed other test handlers.

SOLVARO provides engineering and development services that deliver tailored solutions made of perforated metal plates and non-perforated metal for industrial customers.

SGS- TÜV GmbH introduced its wide spectrum of electro mobility and functional safety services at the October 2010 eCarTec show in Munich, Germany.

AUMA, the manufacturer and supplier of modular electric actuators, has established new subsidiaries in the Middle East (Bahrain) and Brazil.

The PMSXpro process control system from KH Automation Projects has passed its assessment according to VGB Guideline 170 with flying colours.

Multitest’s board division has successfully introduced a new LCR concept for high pin count BGA applications. Board customers now will benefit from cost savings without sacrificing performance.

The latest generation of HEUFT systems ensures that only faultless drinks in perfect cases, bottles and cans reach the customer as well as increasing the efficiency of complete filling lines. It will be showcased at the Brau Beviale 2010 exhibition.

The Hessian company AKO Armaturen & Separations GmbH is a manufacturer of valves and sleeves. Bringing to the industry high-quality products and service.

A new approach for actuator position detection has been adopted for SIPOS 5 Flash actuators.

Signal Integrity Simulation is valuable in understanding the performance of the test interface. It is an important multipurpose tool used for the continuous improvement of design standards, existing design verification and new design optimization.

The company has expanded its range of innovative nozzle geometries for wave soldering machines, establishing a new level of quality in electronics production.

Plug & Yield™ provides significant cost and time savings by enabling users to bring products to market faster and at the lowest possible cost. This highly demanding process includes better resource utilization and a faster “time to yield.”

Maisach/Munich/Germany. The highly compact isolation amplifiers of the MAL-ISO series from BMC Messsysteme GmbH (bmcm) provide a cost-efficient solution for measuring voltage signals or current without interferences.

A growing Middle East market for SIPOS Aktorik’s actuation solution for district cooling is being supported with a premium gold sponsorship package for the DC summit in Doha.

One of the world’s largest fab-less semiconductor manufacturers has evaluated Mercury-based wafer-scale contactors and found them superior to its previous traditional, POGO-style spring pin solution.

Multitest announces record-breaking annual order numbers for its MT9510 tri-temp pick-and-place handler. The demand is driven primarily by automotive customers worldwide.

Dresden, 8th September 2010 – ITI, one of the leading software and engineering companies for system simulation, proudly celebrates its 20th anniversary this September.

At this year's Composites Europe show from September 14 through 16 in Essen FutureCarbon GmbH, the leading producer of super-composite materials, is presenting its latest solutions for heating systems in hall 10-11 on booth G36.

Multitest has successfully passed the annual audit for its ISO 9001 quality management and ISO 14001 environmental certifications for the 10th consecutive year.

ITI, one of the leading software and engineering companies for system simulation, is pleased to announce the dates of the 13th ITI Symposium to be held at the International Congress Center in Dresden on November 24th and 25th, 2010.

Multitest's Gemini™ series contactors have been chosen by another major semiconductor IDM as the contactor of choice for QFN packages. Gemini™ outperformed the competition in multiple categories over months of evaluation.

The company sees great opportunities for the MEMS industry in Asia. Alex Chen, Taiwanese Regional Manager, recently became a member of the Semi Taiwan MEMS Committee to actively contribute to the success of the Asian MEMS industry.

HBM is now introducing the load cell PW27, the only one on the market to meet the EHEDG guideline for aseptic applications in the food sector.

Business Unit Manager Günther Jeserer held a successful Docking and Mounting Interface Workgroup meeting at the recent SEMICON West exhibition on Wednesday, July 14, 2010.

The German company AKO Armaturen & Separations GmbH is located close to Frankfurt a. M. and an innovative manufacturer of air operated pinch valves.

The company has completely redesigned the fluxer area of its wave soldering systems. As a result, both the flux consumption and maintenance times are reduced remarkably, decreasing manufacturing costs in electronics production.

SIPOS Aktorik, supplier of specialist variable speed and standard actuator solutions, reports the success of its Middle East agent.

Multitest has expanded the portfolio of its Singapore spare parts distribution center for pogo pin-based contactors. With this step, all major spare parts for test handlers and contactors now are available for fast delivery to Asian test sites.

Line efficiency can be noticeably increased by means of intelligent utilisation planning, an optimised bottle transport and highly efficient tools for recording the elementary production data and statistical analysis of the complete filling process.

The company has once again been named one of the top ten chip making equipment suppliers in the annual Customer Satisfaction Survey conducted by VLSIresearch. The annual survey provides industry-wide feedback on overall company performance.

AUMA reports a significant market for its actuators in the shipping sector.

The HOOD Group is the first company worldwide to offer an Internet-based training course (in English) to prepare candidates for the approved “Certified Professional for Requirements Engineering (CPRE) - Foundation Level” examination.

As part of an international expansion programme, SIPOS Aktorik has appointed VPower to represent the company and support its actuator range in Vietnam.

The company announces that its concept for MEMS test and calibration equipment continues for pressure sensors. Common applications include all types of pressure monitoring.

Multitest’s ECT Interface Product Division conducted a study to analyze the effects of spring probes on load board pads. Multitest’s flat-technology Mercury® contactors virtually eliminate PCB pad damage.

HEUFT has developed a special pipeline inspector for all cases where foreign bodies have to be detected before the product is packaged: the new HEUFT eXaminer XT.

Multitest's MT9510XP pick-and-place system now offers an option to increase contact force. Thew new feature enables users to test even high pin count devices in up to eight contact sites in parallel.

SEHO has developed a unique heat recuperation system for its reflow ovens that has now been nominated for the “Bayerischer Energiepreis 2010” (Bavarian Energy Award 2010).

SensorDynamics is using Multitest equipment for MEMS test and calibration for the entire temperature range.

A versatile product is now available for industrial manufacturers

Eyjafjallajökull paralysed nearly the whole of Europe for almost a week. But The HEUFT service team was able to keep to all urgent deadlines despite the air travel chaos in the European airspace.

Multitest Introduces e.services to Optimize Spare Parts Processing

Alpha Ventus was set into commercial operation

At this year's Hanover Fair, FutureCarbon, a leading name in carbon supercomposites, presents its innovative products based on carbon nanomaterials including Carbo e-Therm, an electrically heated coating, and CarboGran, a simply dispersed granulate.

Chemicals trader CSC Jäklechemie is the new sales partner of FutureCarbon, the leading supplier of extra-high-grade semi-manufactured products of carbon nanomaterials for further industrial processing.

Pumacy Technologies AG presents new innovation management solutions at ICEME 2010

HEUFT foreign object inspectors are ideal for continuously monitoring product safety. The drinks sector has known this for some time now.

ISO 9001 certification of Pumacy’s quality management system by Deutsche Gesellschaft zur Zertifizierung von Managementsystemen (DQS) provides an assurance of quality in the provision of services.