gao News

BCSI reports on latest events arising in the chapter 11 cases commenced by Delphi Corp.

This high voltage evaluation board is commonly used in applications such as digital motor or machine control, packing mechanisms, UPS, VFC (variable frequency control) and electrical control.

This handheld datacom transmission analyzer has multiple measurement functions including service-interrupt error testing, online error testing and 2Mbit/s unframed error performance testing.

It measures signal amplitude at a specific frequency or any defined carrier. This handheld signal level meter performs C/N measurement, voltmeter functions, spectrum analysis, auto test and data logging.

This tester is used to carry out both framed and unframed tests on various equipment such as primary multiplexers, digital cross connects, automatic protection switches and circuits operating at a speed between 50bit/s and 2048kbit/s.

The board offers code for testing CCS, PWM, ADC, SPI, SCI, CAN communication, FFT, DC brush/brushless motors and AC motors SPWM and SVOWM.

It saves test time and decreases potential errors due to its ability to automatically recognize wavelengths.

This RFID reader module kit, model 713002, is used with RFID tags compliant with the ISO 15693 standard, which are also known as Vicinity Cards.

It handles multiple devices such as Programmable Read-Only Memories (PROMs), Programmable Logic Devices (PLDs), flash microcontrollers and serial and parallel memories.

The DSP emulator pod, model XDS510PP, supports bi-directional ECP and EPP transfer and offers hardware detection in the event of power failure or cable disconnection.

This evaluation board is suitable for such applications as digital motor or machine control, packing mechanisms, UPS, VFC (Variable Frequency Control) and electrical control.

TI F2812 DSP Evaluation Board Compatible with NE2000

It provides testing code for testing CCS, PWM, ADC, SPI, SCI, CAN communication, FFT, DC brush/brushless motor and AC motor SPWM and SVOWM.

It operates in conjunction with TI Code Composer Studio IDE debug tool. T

Its hot-pluggable design provides great convenience for installation, maintenance and operations.

This meter supports Level, V/A, Tilt and Trunk Level testing and can test two channels simultaneously. It also provides fast and accurate measurement of CATV signals.

It features a high programming speed, test vector capability, a multi-array fuse map editor, and poor-pin-contact check upon device insertion.

It tests TTL/CMOS logic IC devices and dynamic or static access memory devices as well as Programmable Read-Only Memory (PROM), Programmable Logic Devices (PLD), flash microcontrollers and serial or parallel memory chips.

The board uses an independent power supply for A/D sampling, which effectively reduces electro-magnetic interference (EMI) to the computing unit.

It features a compact size, plug and plug set up for easy installation, high operating speed and multi-DSP emulation. This emulator runs under Windows 98, NT, 2000 and XP operating systems.

The versatile IPTV tester tests network performance metrics and verifies network configurations in xDSL networks.

It features on-chip flash program memory, on-chip and extended SRAM, a CAN 2.0 interface and 2kbit serial EEprom.

The ITU-T G.728 standard specifies the encoding of 8kHz sampled speech signals for transmission over a 16kbps channel.

It is intended for high performance Digital Motion Control (DMC) systems and is used to evaluate extended keyboard and display panel interfaces of TMS320F2812 chipsets. Its price has been reduced to US$145.00 for a limited time.

The softwIt supports bi-directional ECP and EPP transfer and offers hardware detection in the event of power failure or cable disconnects.

GAO's modem software support most commercial analog front ends (AFE) as well as various discrete DAAs with codecs depending on the application.

It is fully compliant with ITU-T T.38 fax relay specification and supports commonly used processors such as TI C5000 & C6000 series DSPs.

The software supports commonly used processors such as TI C5000 & C6000 series DSPs, ARM processors and ADI DSPs and OS such as Windows and Linux.

It implements the ITU-T V.27ter Recommendation and uses the Group 3 facsimile (G3 fax) modulation scheme for fax image transfer at 4800bps and 2400bps.

It consists of transmitting functions and receiving functions which are called to transmit/receive bits in groups of 2 or 3 at rates of 1200 or 1600 symbols per second respectively.

Compact Visible Fault Locator Ideal for OTDR

USB TI DSP Emulator Includes a Real-Time Sequence Server

Telephone Cable Fault Locator Operates in Pulse and Bridge Modes

fUSB Serial Channel Buffer – A Professional Device for Data Management

Handheld Fiber Optic Power Meter Packed with Rich Features

Mini Fiber Optic Power Meter Packed with Rich Features

GAO Fiber Optics' multi-functional handheld power meter, model 08121, features high accuracy, automatic identification of frequencies, and efficient data storage.

Optical Light Source Offers Switchable Modulation Frequencies

GAO Comm (www.GAOComm.com) is an international leading provider of communication test instruments.

The attenuator is an electronic device that reduces the amplitude or power of a signal without appreciably distorting its waveform.

Plug-in Fixed Attenuators Cover a Wide Range of Applications

Its compact size, rugged design, simple operation and powerful function make the tester an invaluable tool for ADSL technicians and engineers for field use.

Compact PCM Channel Analyzer Supports Flexible Control Modes

The point-to-point transceiver can act as a fiber optic multiplexer and transmit 4E1/8E1/16E1 over long distances without the need for repeaters; the transmission distance is 2 to 120km.

TI DSP Evaluation Interface Board for Digital Motion Control Systems

High Performance Optical Time-Domain Reflectometer

The sophisticated meter accurately measures CATV TILT, C/N, and trunk cable voltage.

The visual fault locator detects broken or serious bend points in fiber optic cables and identifies fiber in ribbon or bundled fiber optic pigtails in installations where identifying a fiber from end to end may be troublesome or time-consuming.

Variable Optical Attenuator Features Low Insertion Loss

The handheld tester is an ideal tool for ILECs, CLECs, and sub-contractors, who are responsible for the installation, maintenance and troubleshooting of ADSL1, ADSL2 and ADSL2+ circuits.