Connecticut Industrial News (United States)

Shore Power Inc., a global distributor of portable power products, has recently hired Jeff Becker as VP of Sales for OEM and Industrial Products.

Lincoln Waste Solutions Educates Several Industry Clients to Rethink, Reduce, Reuse, Recycle

AMCI’s ANG1(E) integrates drive and motion control technology, simplifying installation and cutting costs. Move commands are easily programmed through the host PLC software, and cabling is reduced by expanding up to 6 axes over a single connection.

RMI Corporation announces their 10th Anniversary exhibiting at The Rental Show.

iCure Spot Curing System Improves Manufacturing Productivity

C&M Corporation, a vertically integrated manufacturer of bulk cable, coil cords, and cable assemblies, has announced the appointment of Glenn Boswell as Senior Vice President of Operations.

Shore Power Inc., a global distributor of portable power products, has recently hired Jeff Becker as VP of Sales for OEM and Industrial Products.

Innovative Fiber Reinforced Laminate and Pionite and Nevamar High Pressure Laminates will be on display at Cruise Shipping Miami Tradeshow

Lincoln Waste Solutions Educates Several Industry Clients to Rethink, Reduce, Reuse, Recycle

Bridgeport Fittings announces the Whipper-Snap® Snap-In “U” Shaped Strap Duplex connector – SG3838ASP.

AMCI’s ANG1(E) integrates drive and motion control technology, simplifying installation and cutting costs. Move commands are easily programmed through the host PLC software, and cabling is reduced by expanding up to 6 axes over a single connection.

On-site analysis of total petroleum hydrocarbons in soil is easily handled using the InfraCal TOG/TPH Analyzers. These infrared (IR) analyzers determine TPH levels in under 15 minutes. Levels from 10 ppm to over 20,000 ppm are accurately measured.

RMI Corporation announces their 10th Anniversary exhibiting at The Rental Show.

IRphotonics' Advanced Design Capabilities Provide Innovative Packaging Advantages

De Mayo Universal Distractor™, Knee and Hip Positioners from Innovative Medical Products To Be Featured at AAOS Annual Meeting

Mobile users with CRM enabled can generate rental or sales quotes, look-up customer and prospect information including history, email current and historical customer documents (including invoices and receipts), and much more.

Airpot Corp. announces the Airpel Plus, their newest line of high performance, low friction air cylinder actuators.

The U.S. Patent and Trademark Office recently affirmed rejections of Arlington Industries’ ‘831 Duplex Snap-In product patent that was on appeal with the office

Allows EMT to be coupled in tight locations or where there is limited accessibility

Advanced Micro Controls Inc. (AMCI) has enhanced its industrial Ethernet stepper indexer/drives to include Modbus TCP connectivity.

C&M Corporation, a vertically integrated manufacturer of bulk cable, coil cords, and cable assemblies, has announced the release of ToughFlex™, a new Industrial Ethernet Cable.

IMTI, the Industrial Management & Training Institute in Waterbury, Connecticut, will begin training courses for Solar Photovoltaic (PV) Technicians Thursday, October 27. This new "green jobs" training is an introduction to PV Design & Installation.

IMTI - Industrial Management & Training Institute in the Con Edison Learning Center in Long Island City, New York, is currently accepting enrollment applications for their HVAC techinician training programs. Classes begin Monday, September 26.

Enrollment is currently being accepted by IMTI - Industrial Management & Training Institute, located within the Con Edison Learning Center, in Long Island City, NY, for plumbing technicians. Classes begin Sept. 26, and are held 6:00 to 10:00 PM.

IMTI, the Industrial Management & Training Institute, located in the Con Edison Learning Center in Long Island City, NY, is currently accepting enrollment for electrical technician evening training programs that begin September 26, 6:00 to 10:00 PM.

iCure Spot Curing System Improves Manufacturing Productivity

Bridgeport Fittings’ new Mighty-Bite™ Push-EMT® fittings make connecting EMT conduit faster and easier than ever before.

Evening training programs for electrical technicians will begin September 19 at IMTI in Waterbury, the Industrial & Management Institute. Registration taking place currently for enrollment. IMTI also offers day training programs Mons. through Thurs.

The two campuses of IMTI - Industrial Management & Training Institute - in Waterbury, Connecticut and Long Island City, NY, will begin plumbing technician training programs. The programs begin in Conn. Sept. 19, and in LIC, NY on September 26.

The two campuses of IMTI - Industrial Management & Training Institute - in Waterbury, Conn. and Long Island City, New York, will begin evening training programs for HVAC technicians. The Waterbury classes begin Sept. 19, and the LIC classes Sept. 26.

The two IMTI - Industrial Management & Training Institutes - in Waterbury, Conn., and Long Island City, NY, will begin evening training classes for electrical technicians. The CT school begins programs September 19, and the New York school, Sept. 26.

C&M Corporation, a vertically integrated manufacturer of bulk cable, coil cords, and cable assemblies, has announced the release of a new case history focusing on the applications of Hytrel® and written in conjunction with DuPont™.

Dawn Enterprises provided security bollards for V.A. Medical Center parking garage

Guaranteed Savings For Companies Looking To “Trim The Fat” From Their Waste Disposal Budgets

AMCI announces their complete line of networked rotary encoders compatible with most industrial network protocols

C&M Corporation, a vertically integrated manufacturer of bulk cable, coil cords, and cable assemblies, has announced the appointment of Glenn Boswell as Senior Vice President of Operations.

The InfraCal Soot Meter from Wilks Enterprise now gives users an approved easy-to-use ASTM testing method for measuring the percent level of soot in diesel engine lubricating oil.

BCC Research report identifies key trends and projects value of the global hydrogen market.

Supplies Thermal Energy to Multiple Cure Sites from a Single Source

A video featuring the measurement of oil and grease in water/soil with portable infrared analyzers. This 3-minute video demonstrates how on-site measurements in under 15 minues can save time and money and help comply with regulations,

AMCI announces budget-friendly solutions when adding motion (stepper or servo) to your Allen-Bradley PLC. The new modules meet Rockwell Automation’s performance requirements while delivering a great value

Patented universal straps support multiple sizes, reducing the number of individual products contractors need to carry

Modbus TCP/IP connectivity is now available with AMCI NR25 Series Absoute rotary encoders. Features include Power over EtherNet and coordinated motion among others.

Southwestern manufacturers’ rep has been serving customers since 1985

Terminal managers, distributors, fleet managers, regulators and tax enforcement agencies need a quick, accurate way to measure the percent ethanol in gasoline to ensure a correct blend. The InfraCal Ethanol Blend Analyzer is ideal for this analysis.

Determining oil/grease levels in wastewater to comply with regulatory discharge permits is a worldwide problem facing numerous industries including chemical, oil and gas, and biofuels. More frequent wastewater measurements help ensure compliance.

Energy Efficient Solution Provides Sustainable Construction Advantages

Aware Technology Delivers Confidence in Production through Plant-Wide Condition Monitoring

BizReportShop, the newly launched business industry report shop has attracted global online users to access data and analysis efficiently.

Global Information Inc. would like to present a new market research report UV LED: 2011 published by Yole Developpement

Safety Daily Advisor Helps Safety Managers Comply with New Regulations

Presentation will highlight the benefits of Model-Based Systems Engineering with SysML

“Mighty-B,” Bridgeport Fittings’ “mighty man” super hero, has introduced a new guide to help electrical contractors get their jobs “done fast, done right”

N.O. Holder & Associates, Inc. is now representing Advanced Micro Controls Inc (AMCI) in North Carolina, South Carolina, and Virginia.

C&M Corporation, a vertically integrated manufacturer of bulk cable, coil cords, and cable assemblies, has announced the release of a new white paper entitled, “Understanding Cable Assembly Molding”.

Bridgeport Fittings announced its sales representative and customer service award winners at the 2011 Annual NEMRA (National Electrical Manufacturers Representatives Association) Conference, held February 16-19 in Boston